Horizontal Feed Mixing Machine

Feed mixing is an important process in the fish feed pellet production line in order to ensure the quality and effect of compound feed. We provide horizontal ribbon mixer for you to mix poultry and livestock feed, as well as fish feed, which can mix the raw materials evenly. Our feed mixing machine is widely used in animal feed plant and fish feed pellet plant.

 

Model

Capacity

Loading coefficient

Power

0.3m3

0.4m3

≤0.6

3-4kw

0.5m3

0.6m3

≤0.6

5.5-7.5kw

1.0m3

1.1m3

≤0.6

7.5-11kw

1.5m3

1.8m3

≤0.6

11-13kw

Working Video of Feed Mixing Machine

 Feed Mixing Machine Features
● Wide application: the ribbon mixer is widely used for feed, food additives, binder, silicone rubber, pigment, printing ink, paraffin, resin, vanishing cream, ointment, detergent, etc.
● Large loading coefficient, small floor space, suitable for plant with large capacity and infrequent material changes.

feed_raw_materials_for_feed_mixer


How Does Ribbon Mixing Machine Mix Feedstuff?
The speed reducer of the mixer drives the agitating shaft, the spiral ribbon on the shaft makes the materials turning up and down.The inner spiral pushes the material from middle to both ends, while the outer spiral presses the material from both ends to the middle, which helps discharging material, meanwhile lifting materials up along the inner wall of the mixer, forming a circulation of materials inside the machine to reach an even mixing effect.

inner_structure_of_fish_feed_mixing_machine


Operation and Maintenance of Feed Mixing Machine

♦ After starting the mixer, check its running direction timely to avoid turning reversely.
♦ The load of the mixer must not exceed the effective volume.
♦ After using for 15 days for the first time, release the lubricant oil and clean the oil tank; change the lubricant oil in the speed reducer every three months, and fill grease to the bearing every two months.
♦ Minor repair of the mixer is needed after 1800 hours’ normal running, mainly to check the lubrication point or replace the wearing parts; overhaul is needed after 4000 hours’ normal running, mainly to disassemble to check and clean all the components, replace or rectify all the wearing parts and standard parts.

feed_mixer_machine